In plain English
80% of Mercedes-Benz 280 MOT tests in 2025 were passed first time. For cars of the same ages, the average was 75%. The most common reason to fail is lights and signalling (9% of tests), then body and structure (5%).
What usually fails?
Share of MOT tests that failed on each area
The faults that fail it most
Share of MOT tests failing on each item
- Position lamp: not working3.4%
- Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strength1.5%
- Headlamp aim: too high1.5%
- Headlamp aim: too low1.5%
- Service brake performance: excessively binding1.4%
- Non catalyst emissions: emissions carbon monoxide content excessive1.2%
What testers warn about
Advisories: not a fail yet, but worth checking before you buy
- Engine oil leaks: leak, but not excessive16.7%
- Rigid brake pipes: corroded, covered in grease or other material5.9%
- Tyres: slightly damaged/cracking or perishing4.9%
- Exhaust system: has a minor leak of exhaust gases4.8%
- Tread depth: worn close to legal limit/worn on edge4.7%
- Wheel bearings: has slight play4.4%
Buying one? Check it first
Enter the registration to see that car’s own MOT history: every result, the mileage at each test, and what failed or was flagged.
Compare it with
Figures cover 731 MOT tests of the Mercedes-Benz 280 in 2025, not counting retests. A pass means no fails at all, so a car fixed at the test centre counts as a fail. Source: DVSA anonymised MOT tests and results.